Do you need taps or mixers fitted and replaced? Call us today for fast reliable service. Free quotes provided online
We have 10 years plus experience in repairing and replacing a wide variety of bathroom taps, kitchen taps, shower valves, bath taps and mixer taps. From single basin taps to concealed thermostatic shower valves our engineers have the hands-on experience to suggest and replace either the parts within or the entire units.
We also have the knowledge on user requirements to be able to advise the most suitable option e.g. durable simple units for high occupancy and high use units to high end bathroom mixer units. Contact us today for further advice or to book a visit.
What do your tap installation mixer installation and tap replacement include?
Our services include diagnosing, repairing, and replacing any problems with your taps. We also provide maintenance and upkeep services to keep your taps in good working order.
What is the cost of replacing taps or mixers?
The cost of our tap installation and replacement service is determined by the nature of the job and the type of taps. We provide free estimates and will work with you to find a cost-effective solution.
What causes taps to leak?
In and around London the presence of limescale in our experience is the most common cause of leaks. This occurs especially around the hot valve or outlet. The build up of limescale around the washers can prevent from the complete closure of the valve resulting in a leak. Other factors can also be physical/accidental damage or over usage which can wear the internal components
List of available tap repair/replacement services and associated works
- Kitchen sink taps repair and replacement
- Kitchen mixer taps installed
- Bathroom taps repair and replacement
- Bath or shower mixer/thermostatic repair or replacement
- Replacement or repair of exposed/concealed shower valves
- Replacement of specialist thermostatic mixer valves
- Repair or replacement of waste pipes or traps
- Replacement of mixer tap cartridge
- Replacement of sink/basin waste
- Tap conversions
- Replacement of tap washers
Is it best to replace the entire tap or just the tap heads/valves?
Where possible we carry out and recommend replacement of the internal components of the taps rather than entire units. This can significantly save on time and therefore labour cost.
In addition there are savings on the material costs as these components are usually cheaper than a whole unit but they can be difficult to identify and source as there are large variety manufacturers, makes and models.
In the case of concealed shower valves replacing the entire unit may mean damage to surrounding tiles, replacing the unit and retiling which in itself can cause further issues e.g. sourcing matching tiles. In instances where we notice physical damage to the unit or signs of rust or corrosion we would recommend a complete replacement
What other services you provide?
Dishwasher Installation:
Installation of freestanding dishwashers including associated plumbing and pipework
Washing Machine Installation:
Installation of freestanding washing machines including associated plumbing and pipework
Plumbing and heating:
All aspects of plumbing and heating repair, installation and servicing
Unvented Cylinders:
Installation of direct and indirect unvented cylinders. We are experienced in unvented cylinders as part of gas boiler installation, a HIU installation or stand alone electric Unvented cylinders.
Power flushing:
A method of deep cleaning your central heating system, including pipework, radiators and boiler. Power flushing improves the quality of the water contained within the system by removing the sludge and rust build up that can cause boiler breakdown or long term damage to your boiler and radiators.
Magnetic Filters:
A device that collects debris and rust from the heating system. It can prevent damage to the boiler, leaking radiators and sludge build up within the central heating system.
Boiler Servicing:
An annual boiler service is carrying out a series of checks and cleaning to the boiler in order to maintain and increase the life of a boiler. It is also a requirement by the manufacturer to honour any boiler guarantees.
Gas Appliance Installation:
Installing and servicing a variety of water heating and cooking appliances. Including pipework and all associated works
Gas Leak Repair:
Locating and repairing gas leaks from your gas pipework or gas appliances.
Boiler Installation:
We provide a variety of Gas Boiler installations including Heat Only, System Boilers and Combi Boilers. We are experienced and registered installers of all major brands such as Idea, Baxi, Main, Vaillant, Keston and many more.
HIU Servicing
Heat Interface Units (HIUs) are heat exchange units that are part of a larger network, communal heating systems. Visually they look similar to combi boilers and also require regular servicing.
Frequently Asked Questions
What kind of taps do you repair and replace?
We can repair and replace all types of taps, including kitchen, bathroom, and outdoor taps.
How long does it take to repair or replace taps?
The length of the repair or replacement process will be determined by the type of taps, but most installations are completed within 1-2 hours
Can you repair or replace taps in commercial properties?
Yes. We can repair and replace most commercial taps.
Do your repair and replacement services come with a warranty?
Yes. All of our repair and replacement services come with our two year workmanship guarantee.
What are the risks of a dripping tap?
A leaking tap can waste a significant amount of water, resulting in higher water bills. Furthermore, a leaking tap can cause water damage to the surrounding area, resulting in costly repairs.
What are some of the most common reasons for replacing a tap?
Broken or worn out parts, outdated or inefficient taps, and a desire to update the look of a space are all common reasons for tap replacement.
Can I replace taps myself?
Yes. If you have the right tool and experience you can replace taps yourself
Are my taps likely to break down more if I live in a hard water area?
Yes. Limescale build up can stop taps from work properly and leaking
How can I tell if I need new taps?
A slow or weak water flow, leaks around the base of the tap, and a broken or damaged handle are all signs that you need a new tap. If you are experiencing any of these problems, you should contact a professional plumber who can assess the situation and recommend a solution.
How long does a typical tap last?
A tap’s lifespan can vary, but with proper maintenance, a good quality tap should last for many years. The quality of the materials used, the frequency of use, and the water quality in your area are all factors that can affect the lifespan of a tap